5407935-UUM-D-1119
Johnson Controls Ducted Systems 43
Notifications
Use the Notifications settings to help mange your system effectively.
Tap Service Reminders to set up an email reminder to contact your
dealer for a routine system service in Spring and/or Fall. See Figure 58.
Tap Faults/System Log to enable fault alerts, view the system log, or
email your dealer as needed. See Figure 59.
Use the Temperature Threshold and Humidity Threshold toggle but-
tons to enable or disable the temperature and humidity thresholds. See
Figure 60. Tap the Min setpoint or Max setpoint that you want to
adjust, use the Up/Down arrows to select the required setpoint, and tap
Save. Alternatively, you can tap Reset. A push notification is sent to alert
you if the indoor temperature or humidity goes above or below the range
you have specified.
Figure 58: Service Reminders Figure 59: Faults/System Log
Figure 60: Min and Max Setpoints
A1047-001
A1048-001
87
°
Max
61
°
Min
ResetR
ResetR
t
87
°
Max
61
°
Min
87
Max
ResetR
t
15
Min
Temp Threshold
Humidity Threshold
A1227-001
To Next Page
Loading...
Need help?
General
