Johnson Controls Metasys IFC-200 - Page 2

2 Hardware Installation—IFC-200 Hardware Installation Procedures
● Isolator Module 23
● M500MJ Monitor Module 23
- SLC Connections 23
- NFPA Style B Initiating Device Circuit 24
- NFPA Style D Initiating Device Circuit 24
- Test Switch 24
● M501MJ Monitor Module 24
- NFPA Style B Initiating Device Circuit 25
● M502MJ 25
- SLC Connections 25
- NFPA Style B Initiating Device Circuit 25
- NFPA Style D Initiating Device Circuit 26
● Control Module 30
- SLC Connections 30
- NFPA Style Y Indicating Appliance Circuit 30
- NFPA Style Z Indicating Appliance Circuit 30
- Indicating Appliance Power 31
- Test Switch 31
- SLC Connections 31
- Contact Connections 31
● Addressable Manual Pull Station 34
- BGX-101L Installation 34
● Intelligent Detectors 35
- Installation 35
● Optional Modules 36
- Optional Module Installation 36
- RTM-8 Option Module 36
● NR45-24 Remote Battery Charger 39
- Connecting the Primary Power Source 39
- Connecting the Secondary Power Source 39