Johnson Controls Metasys IFC-200 - Addressable Manual Pull Station; BGX-101 L Installation

34 Hardware Installation—IFC-200 Hardware Installation Procedures
The BGX-101L is an addressable manual pull station with a key-lock reset
feature.
1. Connect the SLC to terminal screws (+) and (-) using wire nuts.
2. The BGX-101L is factory preset with address 00. Set the SLC
address for the pull station by using a screwdriver to turn the rotary
address switches on the back of the unit to the appropriate settings.
ADDRESS
LOOP
black
(-)
red
(+)
1 2 3 4 5 6
A B B+ A+ B- A-
SLC (+) TB 6-B +
SLC (-) TB 6-B -
200BGX
BGX-101L
IFC-200
0
1
2
3
45
6
7
8
9
0
1
2
3
45
6
7
8
9
Figure 26: Wiring Addressable Manual Pull Stations
Addressable
Manual Pull
Station
BGX-101L
Installation