Johnson Controls Metasys IFC-200 - Power Supplies

6 Hardware Installation—IFC-200 Hardware Installation Procedures
1.00
14.5
12.5
0.5
9.5 16.0
200bckbx
Mounting Holes
Primary Power
120 VAC
Low Voltage
Wiring
Figure 1: IFC-200 Backbox Mounting
Note: Insert all cables from the side of the cabinet. Do not insert wiring
from the back of the cabinet. Note the entry locations of primary
120 VAC power and low voltage wiring above.
!
CAUTION: Damage may occur when removing and/or
inserting cards, modules, or interconnecting cables
while this unit is energized. Several different
power sources can be connected to this panel.
Disconnect all power sources before servicing.
Power Supplies