Johnson JET7000 User Manual

Console Engineering Mode Guide JET-6000/7000NEW
1. Holding
“UP”
&
“SLOW”
keys simultaneously about 5 seconds to enter Engineering
Mode.
2 The Display will be showed
"P6"
. Press
“SELECT”
key then press
“SLOW”
or
“FAST”
to set
metric(kph)
or
British(mph)
. Press
“SELECT”
key to store.
3 Press
“DOWN”
key to reach the
“P0”
address. Then press
“SELECT”
key for setting
the
“P0”
parameter (refer to
“DISTANCE’ window”
). Press
“FAST”
OR
‘SLOW’
key
to adjust speed When the speed display
0.5mph(0.8kph)
on
“SPEED” window
then
press
“SELECT’
key to store.
4 Follow the
step 3
for setting the
“P1”(12mph, 19.2kph)
and
“P2”(6mph, 9.6kph).
5 Press
“UP”
key to reach
“P5”
address, press
“SELECT”
key. Then press
“FAST”
key
until the deck raise to the max incline. Then press
“SELECT’
to store.
6 Press
“DOWN”
key to reach
“P4”
address, press the
“SELECT”
key. Then press
“SLOW”
key until the deck lowers to min incline. Press
“SELECT’
key to store.
7 Press
“UP”
key to reach
“P7”
address, press
“SELECT”
key. Then press
“SLOW”
or
“FAST”
key to adjust the values to
"99"
. Press the
“SELECT”
key to store.
8 Press
“UP”
key to reach
“P8”
address, press
“SELECT”
key. Then press
“SLOW”
or
“FAST”
key to input your weight. Press the
“SELECT”
key to store.
9 Press
“UP”
key to reach
“P9”
address, press
“SELECT”
key. Then you can see the total
running hours of the treadmill.
10 Press
“UP”
key to reach
“P10”
address, press
“SELECT”
key. Then you can see the
total running distance of the treadmill.
u Remark:
1 Hold down the
“UP”
and
“DOWN”
key about 5 seconds to reset under the
“P9”
or
“P10”
.
2 Holding the
“START”
key about 5 seconds to reset the P0 P1 P2 P4 P5 in
“P7”
of
engineering mode.
u Define the parameters:
P0 ….Min. Speed P1 ….Max. Speed P2 ….Mid. Speed
P3 ….None P4 ….Min. Slope P5 ….Max. Slope
P6 ….Unite mode P7 ….Max. Time P8 ….User Weight
P9 ….Total RunningTime P10...Total Running Distance
4-3 Revision: 1.0 Date: 2001-06-01

Johnson JET7000 Specifications

General

Brand	Johnson
Model	JET7000
Category	Treadmill
Language	English