Charging the batteries
The batteries in a remote control can be charged in the following ways:
n Using the supplied holder (this is connected to a power source).
n Using the synchronization cable, which can be connected to the distribution box
(see Figure 2-5) in the generator box.
Figure 2-5
Thebatteriesarenot overchargediftheremotecontrolisleft con-
nectedtoa12 Vor24 Vpowersourceforanextendedperiodof
time.
Part no.: 162014 EN-1
15
Release 07/2020
User manual 2300 EF-S system
To Next Page
Loading...
