19
necessary.
f. Check Throttle. Check for smooth operation. Assure throttle “snaps” back to
idle.
g. Check Engine Stop Button. Perform engine stop button test. Repair as
necessary.
h. Check all Nuts, Bolts, and fasteners. Check wheels to see that all axle nuts
and lug nuts are tightened properly. Check and tighten as necessary all other
fasteners to specified condition.
i. Check Roll Cage Bar. Ensure all protective roll cage bar are in place before
operating the Go-Kart.
j. Check Brake Light. Check for proper operation.
k. Check Wheels. Check for tightness of wheel nuts and axle nuts; check that
axle nuts are secured by cotter pins.
l. Check Steering. Check for free operation for any unusual looseness in any
area.
Always follow rules for safe operation and wear a helmet.
To Next Page
Loading...
