73
PREPARATION ATTACH INSTRUCTION
ATTACH BATTERY
STEP 1:FILL THE ELECTROLYTE AS BELOW
a) Pull the seal cap out of the plastic bottle
b) Turn over the seal cap 180 degree, fix it on the outlet of plastic bottle
a) Cut the inlet of plastic bottle
b) Fill the battery with electrolyte to upper lever by inserting every inlet of
the battery
STEP 2:Put the battery into the box on go-kart.
STEP 3:Connect the wire to battery; red to “+”, black to “-”.
STEP 4:Fix the RUBBER COVE, STOP BAND and tighten both bolts and
nuts.
To Next Page
Loading...
