JRC JAN-7201 - Page 177

A-25 Appendix A Alert and Maintenance INFO List
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
APP A
23
24
25
Message Explanation Advice
No. #n
ECDIS(Communication
failed, Main LAN)
Communication with No.
#n ECDIS cannot be
performed via Main LAN.
Check the condition of No. #n ECDIS and
Main LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
No. #n
ECDIS(Communication
failed, Sub LAN)
Communication with No.
#n ECDIS cannot be
performed via Sub LAN.
Check the condition of No. #n ECDIS and Sub
LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
No. #n
Radar(Communication
failed, Main LAN)
Communication with No.
#n RADAR cannot be
performed via Main LAN.
Check the condition of No. #n RADAR and
Main LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
No. #n
Radar(Communication
failed, Sub LAN)
Communication with No.
#n RADAR cannot be
performed via Sub LAN.
Check the condition of No. #n RADAR and
Sub LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
No. #n
Remote-Conning(Comm
unication failed, Main
LAN)
Communication with No.
#n Remote-Conning
cannot be performed via
Main LAN.
Check the condition of No. #n
Remote-Conning and Main LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
No. #n
Remote-Conning(Comm
unication failed, Sub
LAN)
Communication with No.
#n Remote-Conning
cannot be performed via
Sub LAN.
Check the condition of No. #n
Remote-Conning and Sub LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
No. #n
RPS(Communication
failed, Main LAN)
Communication with No.
#n RPS cannot be
performed via Main LAN.
Check the condition of No. #n RPS and Main
LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
No. #n
RPS(Communication
failed, Sub LAN)
Communication with No.
#n RPS cannot be
performed via Sub LAN.
Check the condition of No. #n RPS and Sub
LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.