JRC JAN-7201 - Page 61

19-9 Section 19 Maintenance & Inspection
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
19
21
23
24
24
26
27
[1] [X] button
Click on this button to close the [System Information] dialog box.
[2] Format
The system format and model name of this equipment are displayed.
(Example: JAN-9201)
The [Primary] badge is displayed in front of the format for the primary task.
[3] Functionality
The functions that are installed are displayed in [Device Licence] and [Option Licence].
One of the following is displayed in [Status].
[Status] Meaning
Enable Indicates that the function can be used.
Disable Indicates that the function cannot be used.
Value (such as 500) Indicates the setting value of the Option Licence of the function.
Stand-alone This indicates that it is not possible to use the function of synchronization
with other equipment, and independent operation has to be made.
[4] [Save to USB Device] (Saving to USB flash memory) button
Click on this button to save the displayed information in a USB flash memory in the text format.
19.1.3.3 Confirming H/W Key Information
When you want to use a USB flash memory to read or write a file, make sure in
advance that the USB flash memory is not affected by a computer virus. If the
indicator is infected with a virus, other equipment will also be infected, with the result
that a trouble will occur.
Before removing the USB flash memory, check for the access lamp of the USB flash
memory and make sure that it is not being accessed. If you remove the USB flash
memory when it is accessed, data may be destroyed and a trouble may occur.