4. Installation, Setup and Check
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
56
DOC No. 7ZPNA4014
4.6.3.3. Real Time Monitor
Monitor the Radar Image which is recorded in the VDR/S-VDR at real time to check the operation is working
correctly.
1) Selecting the monitor CH
The image received by CH1 is displayed on TAB “Image 1” screen.
The image received by CH2 is displayed on TAB “Image 2” screen.
2) Starting monitor
START: Click the [Start] button.
STOP: Click the [Stop] button.
3) Diagnosis
Image quality is judged by a manual.
Click the [Image Quality check] button.
To Next Page
Loading...
