4. Installation, Setup and Check
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
57
DOC No. 7ZPNA4014
● Judge an image quality.
Click the radio button of judgment result.
Enter a comment at NG.
* A click of the [Help] button displays advice of an Image quality judging.
* When a location gap of recording image exists or the focus of recording image is incorrect, adjust the
value of the configuration file of the FGB by referring to the “11 clause”.
4.6.3.4. Checking setup data
Confirm that there is no blank in setting data.
1) Entry lamp
Defect in setting entry (Model, Serial number, etc.) as warning can be displayed to
the “Entry” lamp.
● (Green): All entries are inputted.
● (Yellow): The blank entry remains.
Look for a blank entry and input a setup data to blank entry.
2) Image Quality lamp
Result of judgment to image quality is displayed to the “Image Quality” lamp.
● (Yellow): An image quality is not judged.
Open the "Image quality check" screen and enter a result
of judgment.
● (Green): A result of judgment for image quality is good.
● (Red): A result of judgment for image quality is no good.
To Next Page
Loading...
