7-9
As there is no Menu system in the NWW-85 Docking Display the flexibility is
somewhat limited compared to the rest of the other Display.
- Remote dimming ID is default set to number 5 and cannot be changed.
- 200 p/NM speed output is pulsing the currently displayed SOG or STW speed.
- External inputs are default set to terminals 7-9 (Ext Dim-) and 8-9 (Ext Dim+).
- To enable speed displayed with two decimals power-up the display with a
permanent connection between terminals 6 and 9.
Speed with values >9.99 kn will be displayed with one decimal.
To Next Page
Loading...