JRC JLN-900 - Menu Function Summary

7-14
5.5 Menu function summary
No. Name Default setting Function
SD
4-2
SD
4-3
SD
4-4
Display- LOCAL BASIC MENU
LP0 PROPERTIES Select properties menu
LP1 SD4 TYPE
SD4- [ ]
2 3 4
Sets type of SD4 display
SD4-2(Main Display), -3, -4
(factory setting)
LP2 MODE WINDOW List of information to be displayed
in the MODE WINDOW:
LP2.01 DIST WATER
ON ON OFF
Total distance counter of STW
(resulting)
LP2.02 TRIP WAT-L
OFF OFF OFF
Trip distance counter of STW
longitudinal
LP2.03 TRIP WAT-T
OFF OFF OFF
Trip distance counter of STW
transverse
LP2.04 TRIP WATER
ON ON OFF
Trip distance counter of STW
(resulting)
LP2.05 DIST GROUND
OFF OFF OFF
Total distance counter of SOG
(resulting)
LP2.06 TRIP GND-L
OFF OFF OFF
Trip distance counter of SOG
longitudinal
LP2.07 TRIP GND-T
OFF OFF OFF
Trip distance counter of SOG
transverse
LP2.08 TRIP GROUND
ON OFF OFF
Trip distance counter of SOG
(resulting)
LP2.09 DIST+TRP WAT
OFF OFF OFF
DIST WAT and TRIP WAT
are displayed simultaneously
LP2.10 DIST+TRP GND
OFF OFF OFF
DIST GND and TRIP GND
are displayed simultaneously
LP2.11 TRIP WAT+GND
OFF OFF OFF
TRIP WAT and TRIP GND
are displayed simultaneously
LP2.12 SPEED SOG-L
OFF OFF OFF
SOG longitudinal
LP2.13 SPEED SOG-T
OFF OFF OFF
SOG transversal
LP2.14 SPEED SOG
OFF OFF OFF
SOG (resulting)
LP2.15 SPEED STW-L
OFF OFF ON
STW longitudinal
LP2.16 SPEED STW-T
OFF OFF OFF
STW transversal
LP2.17 SPEED STW
OFF OFF OFF
STW (resulting)
LP2.18 DEPTH (ESD)
SENSOR: No offset
KEEL: Negative offset
SURF: Positive offset
OFF OFF OFF
Depth from Echo sounder display
with offset according to $SDDPT
message.
$SDSTN Id displayed if available
LP2.19 DEPTH (LOG)
OFF OFF OFF
Depth from speed log. (not to be
used for navigation)
LP2.20 ROT
OFF OFF OFF
Rate-of-Turn (only available if a
gyro is connected to the system)