7-27
12.3 Dimmer Unit NCM-1080
é Consilium
U/N 704120
SD4 DIMMER
24
48
113
144
6
28,5
26
The Dimmer Unit is used to dim a Display from a remote position.
Menu LP5 EXTERNAL INPUTS shall be set to [DIM] for the dimmer to function
correctly. (See 6. Set-up of Display)
More Displays can be connected to the same dimmer if they are powered from the
same source. All connected Displays will be dimmed but the intensity level on
different Displays will not be the same. It is therefore recommended to use serial
Remote DIM message when more Displays shall be dimmed to the same intensity.
(See chapter 4.8. Remote Dim message)
12.3.1 Installation
Displa
Dimmer Unit Function
Terminal 7 Terminal 3 Dim down
Terminal 8 Terminal 1 Dim up
Terminal 9 Terminal 2 0 VDC
To Next Page
Loading...