12-2
Harbour Acceptance Test.
NJC-80 Sig.Processor, Transducer (TRU) and optional Sig.Distributor
Contents
1 Scope 12-3
2 Equipment needed 12-3
3 Test procedure for TRU 12-3
4 Test procedure for SOG 12-4
5 Test procedure for STW 12-4
6 Test procedure for Sig.Distributor 12-5
7. Speed Log Master Display in JLN-900 Speed Log 12-5
8. STW/SOG Device for JLN-900 SPEED LOG 12-6
Refer to and note in protocol on page 7! 12-6
x Also a set of labels, intended to identify the two speed log device functions in a
JLN-900 Speed Log system, is provided and normally found in a plastic bag attached to
the Sig.Processor unit. 12-6
x Verify that these labels are applied accordingly to each of the two NWW-82
Displays as connected to the Sig.Distributor for the relevant function. 12-6
Refer to the manual for instructions. 12-6
9. Final inspection 12-6
10. Protocol 12-7
To Next Page
Loading...