JRC JLN-900 - 8 STW;SOG Device for JLN-900 SPEED LOG; Refer to and Note in Protocol; Speed Log System, Is Provided and Normally Found in a Plastic Bag Attached to the Sig.processor Unit; Verify that These Labels Are Applied Accordingly to each of the Two NWW-82

12-6
8. STW/SOG Device for JLN-900 SPEED LOG
Refer to and note in protocol on page 7!
x Also a set of labels, intended to identify the two speed log device functions in a
JLN-900 Speed Log system, is provided and normally found in a plastic bag
attached to the Sig.Processor unit.
x Verify that these labels are applied accordingly to each of the two NWW-82
Displays as connected to the Sig.Distributor for the relevant function.
Refer to the manual for instructions.
9. Final inspection
Refer to and note in protocol on page 12-7!
x When the Sig.Processor, TRU, Sig.Distributor and NWW-82 display(s) have
passed all tests the summary protocol on p.7 shall be completed and signed.
x One copy of the completed protocol (pp 7–11) shall be returned to JRC for
reference purpose.