3-7
6 Power requirements and dimensions
NJC-80 Sig.Processor
Voltage: 220-230 V AC (198 – 253)
100 V AC (90 – 110)
optionaly 115 V AC (100 - 126)
Frequency: 47.5 - 63 Hz
Power consumption: typical 50 W, peak at start up: 300 W
Dimensions (WxHxD) 360x480x240 mm
Compass safe distance 5 m
IP-class IP65
Weight 18 kg
NQA-4480 Sig.Distributor
Voltage: 220-230 V AC (198 – 253)
100 V AC (90 – 110)
optionally 100-115 V AC (90 - 126)
Frequency: 47.5 - 63 Hz
Power consumption typical 15 W including 3 pcs Display connected.
Dimensions (WxHxD) 500x500x200 mm
Compass safe distance 2 m
IP-class IP22
Weight 20 kg
NWW-82 Main Display
Voltage 12-24 V DC (10 – 32)
Power consumption typical 1.5 W peak 3 W, powered from the LPU2
Dimensions (WxHxD) 144x144x16 mm
Compass safe distance 0.3 m
IP-class front side IP66, if mounted in BMB
Weight 0.6 kg
7 Liability
All equipment described in this manual is designed for use on board ships and fulfils relevant
requirements specified by International Maritime Organization (IMO).
However, equipment may sometimes fail or work outside its performance specification due to
component malfunction or depending on other factors.
The manufacturer will not take any responsibility if this equipment is used in such a way that
normal or abnormal function causes damage or creates situations that can be dangerous.
All specifications given in this manual are subject to changes without prior notice!
To Next Page
Loading...