5-5
5.2.1.4 Startup (Error-3)
If the following screen is displayed after the unit is turned on, press the key and key
simultaneously to turn off the power.
Contact JRC or its affiliate.
5.2.2 Turning the Unit Off
If the key and key are pressed and held down simultaneously, the power will be turned
off and the screen display will be off.
Attention
_ CHECK SUM _
_ COMPARING ERROR ! _
_ _
_ PLEASE RE-INSTALL _
_ THE PROGRAM. _
PLEASE RESTART AFTER
SOFTWARE UPDATE
PRESS AND HOLD [DIM]+[PWR]
To Next Page
Loading...
Need help?
General
