JRC JMA-5212-6 - Ship Heading Equipment Setting (Heading Equipment)

7.2 NAVIGATOR SETTING
ņ14
7
yyy
yyyy
7.2.1 Ship Heading Equipment Setting (Heading Equipment)
Procedure 1 Press [RADAR MENU] key.
Main Menu opens.
2 Press [7] key.
NAV Equipment Setting menu opens.
3 Press [2] key.
Heading Equipment settings are displayed.
4 From the pull-down menu, select
heading equipment.
1 : GYRO (NCT-4106A, JLR10, JLR20/30)
2 : COMPASS (IEC61162)
<The alternative procedure for steps above>
1 Hold down [RADAR MENU] key.
The Code Input Menu will appear.
2 Press [0] key.
3 Move the cursor onto the “ENT” button in the Code Input menu, and
press [ENT] key.
The Adjust Menu will appear.
4 Press [6] key.
NAV Equipment Setting menu opens.
5 Perform steps 3 and 4 in the “Procedure” above.
Exit 1 Press [RADAR MENU] key.
Menu closes.