JRC JMA-5212-6 - Date;Time Display Setting (Date;Time Setting)

ņ37
7.3.6 Date/Time Display Setting (Date/Time Setting)
In displaying the time, it is necessary to set the LOCAL TIME, LOCAL DATE and TIME ZONE.
When the “ZDA” sentence of NMEA0183 is received, Date/Time is displayed automatically.
* If “ZDA” sentence is not received, the system internal clock function is used to display the date and time.
Procedure 1 Press [RADAR MENU] key twice.
The RADAR Menu will appear.
2 Open the following windows.
8 Open the Radar Sub Menu window.
4 Open the Data/Time Setting window.
3 Set information about date and time.
[1] UTC/LMT (Time display system)
Press [1] to switch the time mode between:
UTC: Universal Time Coordinate
LMT: Local Time
[2] LMT Date
Input the date in local time.
Press [2] key and call up the numeric
keypad.
Input the date using the numeric keypad or the multi-dial.
Then, press [ENT] button.
[3] LMT Time
Input the time in local time.
Input the time using the numeric keypad or the multi-dial.
Then, press [ENT] button.
[4] Time Zone
Input the time-zone difference between the universal time and local time.
Input the time difference using the numeric keypad or the multi-dial.
Then, press [ENT] button.
[5] Display Style
Set one of the following date display formats.
Press [5] key and select a date display format.
YYYY-MM-DD Example: 2007-12-31
MMM DD, YYYY Example: Dec 31, 2007
DD MMM, YYYY Example: 31 Dec, 2007
Exit 1 Press [RADAR MENU] key.
The menu will be closed.
z The “ZDA” sentence of NMEA0183 take presedence
of the above setting.
Attention