3.11 Using Card
y
y y
[I] Copy Internal Information to Card (Copy Internal -> Card)
Procedures 1 Press the [2] key while the File Manager menu is open.
Selected items for Device1 will be displayed.
2 Press the [1] key.
Internal is selected.
3
3 Press the [3] key.
Selected items for Device2 will be displayed.
4 Press numeric keys corresponding to the device to which data is to
be copied.
The list of files saved in the selected device will be displayed.
5 Put the cursor on the data to be copied, and press the [ENT] key.
Pressing the [ENT] key will select the data. Pressing the [ENT] key one more time
will cancel the selection.
6 Put the cursor on Copy , and press the [ENT] key.
The character input screen for the Input File Name menu will appear.
7 Enter the file name to be saved.
Up to 10 characters can be entered.
For the input method on the character input screen, see Section 3.3.4.
After the data has been entered, Confirmation Window will appear.
8 Press the [1] key.
The entered name is written into the selected device as a file name.
Up to the maximum number of items, described on the previous page, can be saved in
the device. With regard to the capacity for saving data, data can be saved on a flash
memory card as a file, and those files can be saved until the flash memory card is full.
3-106
To Next Page
Loading...
Need help?
General
