●PRECAUTIONS●
DANGER
Never carry out internal inspection or repair work of the
equipment by users.
Inspection or repair work by uncertified personnel may
result in fire hazard or electrocution.
For inspection and repair work of equipment components,
consult with our branch office, branch shop, sales office,
or our distributor in your district.
When conducting maintenance, make sure to turn the main
power off.
Failure to comply may result in electrocution.
Turn off the main power before cleaning the equipment.
Especially when a rectifier is used, make sure to turn it off
since voltage is still outputted from the rectifier even after
the indicator and the radar are turned off. Failure to
comply may result in equipment failure, or death or serious
injury due to electric shock.
When conducting maintenance work on the scanner, make
sure to turn its main power off.
Failure to comply may result in electrocution or injuries.
Make sure to turn off the scanner safety switch. Failure to
comply may result in injuries caused by physical contact
with the rotating scanner.
Do not touch the radiator. Even if the power is turned off,
the radiator may be rotated by the wind.
- iii -
To Next Page
Loading...
