JMA-9100 Instruction Manual > 3.BASIC OPERATION > 3.1 OPERATION FLOW
3－1
3
3.1 OPERATION FLOW
Each operation is described in detail below.
• Do not put anything on the operation panel.
If you put anything hot on it, it may be deformed.
• Do not give any impact to the operation panel,
trackball, or controls.
Otherwise, any failure or damage may result.
Attentio n
POWER ON AND
START THE SYSTEM
OBSERVE AND
ADJUST VIDEO
ACQUIRE AND
MEASURE DATA
END THE OPERATION
AND STOP THE SYSTEM
To Next Page
Loading...
