JRC JMA-9133-SA - C.7 Route

JMA-9100 Instruction Manual > C.Menu Index > C.7 Route
C－11
C
C.7 Route
├ 1. Select Route - - - - - - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.1 on page 3-67
├ 2. WPT/Route Settig
│├1. Waypoint Alarm - - - - - - - - - - - - - - - - - - - - - - -
section 3.7.4.1 on page 3-79
│├2. Route Alarm - - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.4.2 on page 3-80
│├3. Set Route Sequence- - - - - - - - - - - - - - - - - - - - - - section 3.7.2 on page 3-68
││├1. Planned Speed - - - - - - - - - - - - - - - - - - - section 3.7.3.5 on page 3-77
││├2. Add - - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.2.2 on page 3-69
││├3. Correct Position - - - - - - - - - - - - - - - - - - - section 3.7.2.3 on page 3-70
││├4. Correct Planned Speed - - - - - - - - - - - - - - - section 3.7.2.4 on page 3-71
││├5. Delete - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.2.5 on page 3-72
││├6. Insert - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.2.6 on page 3-73
││└7. New Monitor Route - - - - - - - - - - - - - - - - - section 3.7.2.1 on page 3-68
│├6. Waypoint Input - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.3 on page 3-75
│├7. Save Temporary Route
│├8. Off-Track Limit Line - - - - - - - - - - - - - - - - - - - - -
section 3.7.6.1 on page 3-83
│├9. Next
│├1. SEL. NUM/Comment Size - - - - - - - - - - - - - - - - - -
section 3.7.6.2 on page 3-84
│├2. Waypoint Vector - - - - - - - - - - - - - - - - - - - - - - - section 3.7.6.3 on page 3-84
│├3. Status of Origin/DEST - - - - - - - - - - - - - - - - - - - - section 3.7.6.4 on page 3-85
│└4. WPT Number Display - - - - - - - - - - - - - - - - - - - - section 3.7.6.5 on page 3-85
├ 3. WPT/Route Operations - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.5 on page 3-81
│├1. Route Sequence- - - - - - - - - - - - - - - - - - - - - - - section 3.7.5.1 on page 3-81
│├2. Waypoint Switch Mode- - - - - - - - - - - - - - - - - - - - section 3.7.6.6 on page 3-86
│├3. Waypoint Skip - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.5.2 on page 3-82
│├4. Waypoint Back Skip - - - - - - - - - - - - - - - - - - - - - section 3.7.5.2 on page 3-82
│├5. Set/Cancel Waypoint
│└6. Clear WPT/Route Data
├ 4. File Operations - - - - - - - - - - - - - - - - - - - - - - - - - - - -
section 3.7.8 on page 3-87
│├1. Select Card Slot - - - - - - - - - - - - - - - - - - - - - - - section 3.7.8.1 on page 3-87
│├2. Load - - - - - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.8.3 on page 3-88
│├3. Save - - - - - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.8.2 on page 3-87
│└4. Erase - - - - - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.8.4 on page 3-89