JMA-9100 Instruction Manual > 3.BASIC OPERATION > 3.6 DISPLAY USER MAP
3－63
3
2) Open the File Operations menu by performing the following
menu operation.
→
3) Left-click the item button of and select the
card slot.
Slot1 and Slot2 of the Select Card Slot items are switched.
4) Left-click the button.
The Input File Name screen will appear.
5) Enter the file name to be saved.
Up to 10 characters can be entered.For the input method on the character input screen, see
Section 3.3.4.7 "Entering a character".
After the data has been entered, Confirmation Window will appear.
6) Left-click the button.
Navigation data currently being displayed is saved.
3.6.5.4 Clearing the saved navigation data (Erase User Map)
Procedures
1) Insert a flash memory card into the card slot.
Flash memory card (option) is necessary.
2) Open the File Operations menu by performing the following
menu operation.。
→
3) Left-click the item button of and select the
card slot.
Slot1 and Slot2 of the Select Card Slot items are switched.
U.Map
7. File Operation
1. Select Card Slot
5. Save
1. Yes
U.Map
7. File Operation
1. Select Card Slot
To Next Page
Loading...
