JRC JMR-5410-6XH - Page 144

Section 3 Common Basic Operations 3-26
Setting item
Contents
Setting value
Rotation In rectangle cursor edit mode, rotate the rectangle
cursor by using the [MULTI] dial.
Turn clockwise: +, Turn anti-clockwise: -
It is possible to set from the numeric value input
keyboard by selecting an input box.
0.0 to 359.9°
Length of One Side Displays the length of one side of the rectangle
cursor.
Maximum value
• NM: 7.071 NM
• km: 13.096 km
•
sm: 8.139 sm
Simulate Closing Set whether to close the rectangle automatically.
On: The rectangle cursor moves following the
movement of own ship. The rectangle cursor
rotates following the rotation of own ship.
Off: The rectangle cursor does not follow the
movement of own ship.
Enable: Checked
Disable:
Unchecked
Distance Set how many NM (sm/km) own ship should travel
in order to close the rectangle cursor.
0.001 to 1.000 NM