Section 15 Maintenance & Inspection 15-12
15.4.1 Confirming the screen status [Monitor Test]
Confirm the screen status.
[Operation procedure]
Open the Monitor Test screen by performing the following menu operations.
[Menu] button → Maintenance → Diagnosis → Monitor Test
When a colour of the dialogue or pattern button is clicked on in a monitor test, the colour or the pattern
is displayed on the screen. Check the status of this screen in the display status. Check the screen
status with the display status.
To reset the display, click on the button again.
Pattern list
Pattern button name Display
The entire screen is displayed in red.
The entire screen is displayed in green.
The entire screen is displayed in blue.
All White The entire screen is displayed in white.
Pattern1 Displays the pattern for checking the communication quality for VDR.
Patter1 Pattern2 Pattern3
Pattern2
Pattern3
Grey Scale
Displays the grey scale pattern for checking the monitor brightness
adjustment.
Grey scale patterns can be identified with brightness in day/night mode. By
adjusting the monitor brightness to facilitate identification of grey scale
patterns, the optimum brightness can be set. The brightness in night mode
can also be adjusted in the same way.
Use the [Day/Night] button on the right Toolbar to switch between the day
mode and the night mode.
For the details of the [Day/Night] button, refer to “2.2.5 Right toolbar”.
To Next Page
Loading...
