JRC JMR-5410-6XH - C-Map Max; Warning Screen

Section 9 Chart 9-2
9.2 C-MAP MAX
Memo
Don’t insert the SD card during startup the mode from the Mode Selection screen.
9.2.1 Warning screen
A warning screen relating to the C-MAP MAX chart is displayed at the following timing.
At startup
When the RADAR mode is selected on the mode selection screen, if any of the following conditions is
satisfied, a warning screen is displayed.
• Consent has never been made on any warning screen after the power was turned on.
• C-MAP MAX is selected on the chart display menu.
• The SD card of C-MAP MAX is inserted.
Upon chart switching
When the chart is switched to C-MAP MAX on the chart display menu and the following conditions are
satisfied, a warning screen is displayed.
• Consent has never been made on any warning screen after the power was turned on.
• The SD card of C-MAP MAX is inserted.
When a warning screen is displayed, read the contents of the warning carefully. When the [OK] button
is clicked on, the system assumes that consent has been made and closes the warning screen.