Section 6 Target Tracking and AIS 6-24
6.5.5 Displaying target ID No.
A target ID number is a value displayed beside the acquisition symbol when a target is acquired.
A target ID number 1 to 30 is automatically assigned to each target in acquisition order. Once a target
ID number is assigned, it identifies the target until the target is lost or the target acquisition is cancelled.
Memo
The ID number is always displayed for only targets with which numeric data is displayed.
[Operation procedure]
Open the TT/AIS target setup screen by performing the following menu operations.
[Menu] button → View → Target
1 Select an ID number display method from the [TT Target ID] list.
[Off]: Hides target ID numbers.
[On]: Displays target ID numbers.
[TT Track]: Displays ID numbers of only targets set for track of other ships.
[Ship's Name]: If the ship’s name has been input in the [TT Target INFO] dialogue, the ship’s
name is displayed. If the ship’s name has not been input, the identification
number is displayed.
If there are many tracking targets and their symbol display is confusing, set Target Number Display
to off to view the radar display easily.
6.5.6 Editing tracked target properties
The tracked target property such as tracked target ID name can be arbitrarily edited for individual
tracked targets acquired.
The [TT Target INFO] dialogue is used for editing.
The following items are displayed.
Tracked target ID appears.
Enter the tracked target ID name.
Edit Template The tracked target ID name that was entered in [Name] is set.
For the details, refer to "6.5.6.1 Adding Tracked Target ID Name".
Track Colour The track colour of tracked target is set.
For the details, refer to "6.5.6.2 Setting track colour of tracked target".
Reference Target The target for which ground is fixed is set to a reference target.
For the details, refer to "6.5.7
Setting target for which ground is fixed to a
Priority When a TT target and AIS target are determined to be the same targets, the TT
target or AIS target to be displayed on a priority basis can be set.
For the details, refer to "6.3.8 Association Target Symbols"
To Next Page
Loading...
