JRC JMR-5410-6XH - Setting Vector Mode

6-15 Section 6 Target Tracking and AIS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Relative Vector Mode
The relative vector does not represent the true motion of the target, but its relative relation with own
ship. A target with its relative vector directed to own ship (passing through the CPA limit ring) will be a
dangerous target.
In the Relative Vector mode, it can be seen at a glance where the CPA limit of the dangerous target is.
6.4.2.2 Setting vector mode
1
Click on the Vector/Past POSN true/relative selector button
in the other ship information window.
Each click switches track display mode between [T] and [R].
Vector/Past POSN true/relative selector button
HL
The true vector is not displayed.
CPA ring
Relative vector
Example of Relative Vector Mode