JRC JMR-5410-6XH - Creating a Text (Text Object); Creating a Text by Specifying the Latitude and Longitude

Section 10 Creating a User Map 10-20
10.6.3 Creating a text (Text object)
Any character information can be displayed on the user map.
1 Click on the [Type] button on the drawing toolbar.
An icon list dialogue is opened.
Select a text (Txt) icon. (Refer to "10.5.3 Selecting an object type").
2 With the cursor, click on the position on which an object is to be created.
A text box is created at the position on which the button was clicked and a text is displayed.
The parameters of the text that was created are displayed on the object property dialogue.
3 Adjust the parameters on the object property dialogue.
For the text input method, refer to "10.6.3.3 Editing a text", for the template usage method, refer
to "10.6.3.4 Editing a template", and for the text angling method, refer to "10.6.3.5 Changing a
text angle".
4 To create an object on another position continuously, repeat Steps 2 and 3.
10.6.3.1 Creating a text by specifying the latitude and longitude
1
Click on the [Enter POSN] button on the drawing toolbar.
The [Enter Position] dialogue appears (Refer to "10.5.6 Creating an object by specifying latitude
and longitude").
2 Enter the latitude and longitude of the object to be created and click on the [Enter]
button.
An object is created on the specified latitude and longitude and the property information is
reflected in the object property dialogue. (Refer to "10.5.8 Object property dialogue").
3 Adjust the parameters on the object property dialogue.
For the text input method, refer to "10.6.3.3 Editing a text", for the template usage method, refer
to "10.6.3.4 Editing a template", and for the text angling method, refer to "10.6.3.5 Changing a
text angle".
4 To create an object on another position continuously, repeat steps 2 and 3.