JRC JMR-5410-6XH - Entering Own Ships AIS Voyage Data

Section 6 Target Tracking and AIS 6-46
6.9 Entering Own Ship's AIS Voyage Data
Set the own ship's AIS voyage data.
[Operation procedure]
Open the AIS voyage information setup screen by performing the following menu operations.
[Menu] button → TT/AIS → AIS Voyage Data
1 Since the information that was retrieved from AIS is displayed in the [AIS Voyage Data]
dialogue, input the information that is not displayed or change the information that is
displayed.
Item
Setting
Destination
(Input box)
Enter the destination in the [Destination] input box (maximum 20 characters),
or display the history list and click on the destination to enter.
Destination
(History list)
ETA (UTC) Click on the calendar icon to display the date picker, and enter the
expected date (and time) of arrival by clicking.
NAV Status Select from the combo box. For the details, refer to the [Navigation Status]
table in “6.6.4 Displaying AIS information”.
Draft Enter draft in the input box within the range from 0 to 25.5 m. The draft can
be entered in increments of 0.1 m. If the draft is more than 25.5 m, enter 25.5
m.
Cargo Cat. Select the cargo category from the combo box.
Category X (DG/HS/MP)
Category Y (DG/HS/MP)
Category Z (DG/HS/MP)
Category OS (DG/HS/MP)
No Additional Information
All Ships of This Type
Not Available
Person
On-Board
Enter the number of crew members in the input box within the range from 0 to
8191. When the number of crew members is more than 8191, enter 8191.
2 Click on the [Send] button to save the input information.