JRC JMR-5482-S - 2 Nd PPI; Wind;Current Block

2-23 Section 2 Name and Function of Each Unit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
2.3.1.5 2nd PPI
The setting items are the same as those of the main PPI setting except for the setting items that can
be specifically set under 2nd PPI.
For the details, refer to "2.2.10 Range and mode information".
Memo
• In “screen fixed display” (C mode), EBL/VRM is not displayed in the 2
nd
PPI.
• When the numbers of the direction graduations become overlapped and cannot be
distinguished, the numbers will be thinned out and displayed.
• 2nd PPI is only displayed for a 26-inch screen.
2.3.1.6 Wind/Current Block
The Wind/Current Block shows the wind speed and current information.
The following information is displayed.
Displayed information
Explanation
Wind (Wind
bearing/speed
information)
Shows the wind bearing/speed information.
Display varies depending on the wind bearing true/relative display
method.
For True Bearing display, [Bearing] (wind bearing), [Speed] (wind
speed), and BFT (Beaufort scale) are displayed in numeric values.
For display of a relative bearing, [Bearing] (wind direction) and [Speed]
(wind velocity) are displayed in numerical values.
Current (Tidal current) Shows the tidal current information.
[Set] (Current set) and [Speed] (Current drift) are displayed in numeric
values.
[True]/[Relative]
(True/Relative wind
switching) button
Switches between True and Relative display for wind bearing and tidal
current.
Click the [True] (true wind bearing) button to show wind bearing and
tidal current in the true direction.
Click the [Relative] (relative wind bearing) button to show wind bearing
and tidal current in the relative direction.