Section 16 Failures and After-Sale Services 16-22
16.4.4 Extending the functions
The functions that are available for this equipment can be extended.
To extend a function, new licence information (file) must be obtained and imported to this equipment.
For function extension, please request to our sales department or our branch office, sales office, or
agent near your premises.
Memo
Expandable functions are as follows.
• Availability of plotter function
• Extension of displayed TT symbol (Extending from 30 to 100)
• Extension of displayed AIS symbol (Extending from 180 to 1000)
16.4.4.1 Importing the licence information
Import the licence information that was obtained (licence file) to this equipment via a USB memory
device.
Connect the USB memory device in which the licence information is stored.
1 Press the Power button of the operation unit.
The Power button is lit. After a short time, the Mode Selection screen is displayed.
2 Click on the password input section.
A password input dialogue is displayed.
3 Enter the password, 9380.
The [Import Licence] dialogue is displayed.
4 Click on the [Browse] button.
The [System] dialogue is displayed.
5 Select the name of the licence file stored in the USB memory device (example:
JRCMRADAR.Icn) and click on the [OK] button.
The [System] dialogue is closed.
6 Click on the [Import] button.
When import is completed, a confirmation dialogue box appears.
Close the dialogue box by clicking on the [OK] button.
7 Close the [Import Licence] dialogue by clicking on the [x] button to return to the Mode
Selection screen.
In this case, a new licence is adopted.
To Next Page
Loading...
