JRC JMR-5482-S - Managing the Newpec Chart; Pick Report (Newpec)

Section 9 Chart 9-8
9.3.2 Managing the newpec chart
Manage chart data on the Chart Maintenance menu.
Open the “Chart Maintenance” screen from the Mode Selection screen.
The [Import newpec chart] button is provided on the “Chart Maintenance” screen.
Insert the USB containing new chart data and execute import.
The newpec chart import procedure is shown below.
1 Click on the [Import newpec chart] button.
The newpec import selection screen is displayed.
2 Select the newpec data that is stored in USB from the folder list for import and click on
the [OK] button.
The [OK] button can be clicked on only when a layer into which the newpec can be imported is
selected from the folder list.
3 When an import confirmation screen is displayed, click on the [OK] button to continue
import.
Since the old data is deleted when the [OK] button is clicked on the import confirmation screen,
newpec can no longer be used if the execution is cancelled before completion.
4 When import is completed successfully, a successful import popup window is
displayed. Terminate the processing by clicking on the [OK] button.
If import fails, a popup window is displayed indicating the failure. The possible failure causes
are insufficient storage space and removal of the USB card during import processing, among
others.
9.3.3 Pick report (newpec)
This function retrieves information on an object on a chart and displays it on the pick report screen.
When you right-click on a chart and then select [Readout Chart Information] from the displayed context
menu, the pick report screen is opened, enabling the checking of chart information.
The following contents are displayed on the pick report screen for newpec.
Item
Contents
Object List
Picked Object Displays in the list the objects within the pick cursor.
Name
Displays the name of the object.
Attribute List
Attribute Displays the additional information of the object that has been selected from
the object list.
Value Displays the value of the additional information of the object that has been
selected from the object list.