JRC JMR-5482-S - Setting a Date and a Time (Calendar Operation); Details and Usage of a Calendar Picker and a Time Picker; Details of a Calendar

Section 3 Common Basic Operations 3-40
3.20 Setting a Date and a Time (Calendar
Operation)
Set a date and a time on the calendar input screen.
The following calendar types are available.
• Calendar picker
• Calendar picker + Time picker
• From-To calendar picker + Time picker
3.20.1 Details and usage of a calendar picker and a
time picker
3.20.1.1 Details of a calendar
[1] Year selection spin button
Selects a year to be displayed in the date selection box.
• When the right spin button is clicked on, the year is changed in the ascending order.
• When the left spin button is clicked on, the year is changed in the descending order.
[2] Month selection spin button
Selects a month to be displayed in the date selection box.
• When the right spin button is clicked on, the month is changed in the ascending order.
• When the left spin button is clicked on, the month is changed in the descending order.
[3] Day selection box
Selects a day.
[4] Time selection spin button
Sets an hour, a minute, and a second.
• When the upper spin button is clicked on, the hour, minute, and second are changed in the
ascending order.
• When the lower spin button is clicked on, the hour, minute, and second are changed in the
descending order.
[5] [OK] button
Completes the setting and closes the calendar.
[5]
[4]
[2]
[1]
[3]
Selected date