Section 16 Setting up Screen View 16-60
16.2.21 Setting up the Gyro/Rudder graph
When [Gyro/Rudder Graph] is selected on the classification pain, the [Gyro/Rudder Graph] dialog is
displayed on the edit pain.
This dialog may not be displayed depending on the equipment setting.
The following table shows the setting details:
Setting item Setting Setting value
Time Range Select a time range for the Gyro/Rudder graph
from the combo box.
5 min, 10 min, 15 min, 30 min
Rudder Range Select a rudder angle for the Gyro/Rudder
graph from the combo box.
30°, 40°, 50°, 60°, 70°, 80°
To Next Page
Loading...
