JRC JMR-7230-S - Page 583

16-61 Section 16 Setting up Screen View
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
16.2.22 Setting up the Engine Graph
When [Engine Graph] is selected on the classification pain, the [Engine Graph] dialog is displayed on
the edit pain.
Note
This dialog may not be displayed depending on the equipment setting.
The following table shows the setting details:
Setting item Setting Setting value
Time Range Select a time range for the engine speed graph
form the combo box.
10 min, 15 min, 30 min,
60 min
Maximum rpm Select an engine speed on the Ahead side form
the combo box.
AH100, AH200, AH300,
AH500, AH1000
Minimum rpm Select an engine speed on the Astern side form
the combo box.
0, AS50, AS100