JRC JMR-9230-S3 - Page 574

Section 16 Setting up Screen View 16-52
16.2.14 Setting up AIO/T&P display
When you select [AIO/T&P] in the classification pane, the [AIO/T&P] dialog box appears in the edit
pane.
The descriptions of settings are shown in the table below.
Setting Item Description of Setting Setting Value
All AIO Objects Select and enable the display of all AIO
objects.
To enable: Select.
To disable: Clear.
Temporary Notice (T) Select and enable the display associated
with Temporary Notice (T).
To enable: Select.
To disable: Clear.
Preliminary Notice (P) Select and enable the display associated
with Preliminary Notice (P).
To enable: Select.
To disable: Clear.
ENC Preliminary Notice
(EP)
Select and enable the display associated
with ENC Preliminary Notice (EP).
To enable: Select.
To disable: Clear.
No Information Objects Select and enable the display associated
with No Information Objects.
To enable: Select.
To disable: Clear.
All T&P Objects Select and enable the display of all T&P
objects
To enable: Select.
To disable: Clear.
Temporary Notice (T) Select and enable the display associated
with Temporary Notice (T).
To enable: Select.
To disable: Clear.
Preliminary Notice (P) Select and enable the display associated
with Preliminary Notice (P).
To enable: Select.
To disable: Clear.
Note
T&P will not be displayed if the display scale is a small scale of more than 1 / 20,000,000.