Section 18 Setting up the Operation Mode 18-14
18.5 Setting Other Ship's Radar Trails
Select [Trails] in the classification pane.
Set other ship's radar trails in the setting dialog of the edit pane (RADAR screen only).
Setting Item Description of Setting Setting Value
Trails Mode Select a radar trail display mode. True
Relative
Trails Ref Level Set up a video level required to draw radar trails.
The higher the level gets, the higher the threshold value
for drawing radar trails becomes.
Level1(Low)
Level2
Level3
Level4(High)
Trails Reduction Set up the radar trail reduction processing level.
The higher the level gets, the stronger the reduction
processing level becomes.
Off
Level1(Wide)
Level2
Level3(Narrow)
MAX Length Select the maximum value of the time to display radar
trails.
Short
Long
To Next Page
Loading...
