JRC JMR-9230-S3 - Page 615

18-13 Section 18 Setting up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
Overview of the Observation Scene Preset function
Setting Item Description of Setting
Save Present State
The current settings are saved as the setting values of the currently selected
observation scene. When this item is clicked on, the confirmation screen is
displayed. To save the setting, click on [OK] and to cancel the operation,
click on [Cancel].
Save User Setting
Data that can be called is saved as the user default values of the selected
observation scene. When this item is clicked on, the confirmation screen is
displayed. To save the setting, click on [OK] and to cancel the operation,
click on [Cancel].
Load User Setting
Load the user default values to the data that can be called. When this item is
clicked on, the confirmation screen is displayed. To call the set data, click on
[OK] and to cancel the operation click on [Cancel].
Reset JRC Defaults
Load the default values to the data that can be called. When this item is
clicked on, the confirmation screen is displayed. To call the set data, click on
[OK] and to cancel the operation click on [Cancel].
Default Data
Data that can Be Called
Currently Used Data
Observation
Scene Selection
Interference Removal
Video Processing
Target Enhance
User Default Data
Open-sea
Open-sea
Open-sea
Reset JRC
Defaults
Load User
Setting
Save User
Setting