3-13
3
Fig. 3.2.2j Prefix Code data setting error window
・Error! Please set SSAS Schedule #● Prefix Code data from 0 to 99!
Response: Set the Prefix Code of SSAS Schedule #●, within the range of 0 to 99.
Fig. 3.2.2k Subscriber’s Number setting error window
・Error! Please set SSAS Schedule #● Subscriber’s No!
Response: Set the subscriber’s number of SSAS Schedule #●, Input subscriber’s number to
first box (from left) within the range of 0 to 999.
Input subscriber’s number into second box (from left) :
by 11-digit figure or less when Network Type is Telex.
by 10-digit figure or less when Network Type is PSDN.
by 12-digit figure or less when Network Type is PSTN.
by 5-digit figure or less when Network Type is Closed Net.
or by alphanumeric character, 6 character or less when Special Access or E-mail is
selected.
Fig. 3.2.2l Modem Type data setup error display
・Error! Please set SSAS Schedule#● Modem Type V22,V22bis,V32bis or Other!
Response: Select Modem Type of SSAS Schedule #● from V22,V22bis,V32bis, and others.
Set the name of Modem Type to the box right side of button, by alphanumeric characters.
NOTE
To Next Page
Loading...
