JRC JUE-95SA - Security Alert Test Transmission

3-17
3
NO
Test button
3.4 Test transmission of Security Alert
3.4.1 Flowchart of Security Alert Test Transmission
This test is done without sending real security alert.
YES
Push Test button
(
The button star
t
s to li
g
ht
)
Test transmission of Security
Alert is started
Test transmission of Secu
r
it
y
Alert is com
p
leted.
Push Security button (ON)
Test button starts to blink
Push Test button again
(Light disappears)
Pushed Security button (OFF)
Test button stops blinking
(Still lighting)
Means user’s action
Means status
Security button
Is the button
depressed again
within 30
seconds?