16
Data Reset (System Mode)
The Data Reset function allows you to reset all the
programming in the selected model (1 or 2) to the
factory default settings. Before using the Data Reset
function, it is important to enter the Model Select
function and check to make sure the current model
number indicated (1 or 2) is the model to which you
want to reset to the factory default settings. The
Model Select function is described on page 14.
Accessing the Data Reset Function
1. Press the Scroll and Channel keys at the same time
and hold.
2. Turn on the transmitter power switch to enter the
System mode.
3. Press the Scroll key until "CLR" appears on
the screen.
4. Press the Increase and Decrease keys at the same
time to reset the data. To confirm that the selected
model's programming has been reset, a beep will
sound and the model number selected (1 or 2) will
stop flashing.
5. Press the Scroll key to access the Copy Model
Data function.
6. To exit the System mode, either turn the
transmitter power switch off or press the Scroll
and Channel keys at the same time.
clr
1
Model to
be Reset
Press and hold the Scroll
and Channel keys at the
same time while turning
the transmitter power
switch on. Next, press
the Scroll key until
“CLR” appears.
Press the Increase and Decrease keys at the
same time to reset (clear) all settings for the
selected model to the factory default settings
SCROLL
ENTER
CHANNEL
INCREASE
CLEAR
DECREASE
To Next Page
Loading...
Need help?
General