17
Accessing the Function Mode
To enter the Function mode, it is necessary to first
turn on the transmitter's power switch. Next, press
the Scroll key until a beep is heard. The display will
change to show the first function listed on the
Function Mode flow chart as shown below. Press the
Scroll key to scroll down through the functions one by
one, as shown in the flow chart. Once the desired
function has been reached, use the Channel key to
select the appropriate channel (if applicable). To
adjust the values of the function, simply press the
Increase (+) or Decrease (-) keys until the desired
value is displayed on the screen. To exit function
mode, press the Scroll and Channel keys at the same
time. The next time you enter Function mode, you will
be returned to the last function accessed.
sts
0
TRIM
st
100
EPA
ths
0
TRIM
st
SB-TRM
Channel
Key
Channel
Key
Channel
Key
Sub-Trim
(page 19)
Servo Reversing
(page 20)
—
REV•NORM
—
REV•NORM
R/B
L/F
th
100
EPA
Channel
Key
To Next Page
Loading...
Need help?
General