21
Accessing the Direct Trim Mode
stc
0
thc
0
brk
50
EPA
stg
70
ā
RATE
Steering Trim
(page 22)
Throttle Trim
(page 23)
Steering Dual-Rate
(Grip Lever B)
(page 24)
Brake Travel Adjustment
(Grip Lever A),
(page 25)
TRIM
TRIM
R/B
The Direct Mode function of the XR2i is accessible
through the use of the electronic throttle or steering
trim levers, as well as the two electronic grip levers
(A&B) located on the upper portion of the grip handle.
This function allows for quick trim adjustment of
these controls.
To access the Direct Trim Mode function, turn on the
transmitter power switch. Next, move the desired trim
lever to be adjusted. The appropriate screen for the
selected trim lever will be displayed. To adjust, simply
move the trim lever in the desired direction until the
correct amount of trim is achieved. Once the desired
trim is achieved, the screen will return to the Normal
display screen after approximately two seconds from
the last trim input. If the Increase or Decrease keys
are pressed any time during the two seconds, the
system will return to the previous screen in use.
To Next Page
Loading...
Need help?
General