24
Grip Lever B: Steering Dual-Rate Trim Adjustment (STG)
INCREASE
CLEAR
DECREASE
stg
70
ā
RATE
Current Value
(20% to 100%)
Press the Increase and Decrease keys at the same time to
reset the steering dual rate trim to the factory preset (70%).
Decrease
Increase
Grip Lever B
Steering Dual-
Rate Trim
The Steering Dual-Rate adjustment, located at Grip
Lever B, allows the Dual-Rate value (maximum servo
travel) to be increased or decreased within a range
from 100% through 20% of the total end point value
established in the steering EPA function. This function
is very useful in race conditions as it allows you to
custom tailor the steering radius and sensitivity for
the current track conditions.
Please note that since the Dual-Rate value shown in
the "STG" screen is the percentage of the end-point
value established in the Steering EPA function, the
value will not always increase or decrease each time
Grip Lever B is moved.
If the Emergency Steering button function (page 15)
is active, pressing Grip Button C will restore the steer-
ing dual rate to 100% until the button is released.
To adjust the Steering Dual-Rate value, move the elec-
tronic Grip Lever B either left (-) or right (+). As soon
as the trim is moved, the "STG" Steering Dual-Rate
screen will appear and will continue to be displayed
unless the Grip Lever B is untouched for a period of
two seconds. To reset the trim value to the factory
preset setting of 70%, press the Increase and
Decrease keys at the same time while the "STG"
screen is displayed.
To Next Page
Loading...
Need help?
General