JS-AZ PRIS SCALE - Clearing Limit Values; Backlight Color Indicators

18
.
Procedures
1. Press ALARM key while the scale is either loaded or unloaded.
WEIGHT
UNIT WEIGHT
COUNT
--Hi--
0
0
Ib kg g
Local Remote HI OK LO ADD
High limit Window for displaying high Window for displaying
limit value to be input low limit value to be input
2. Key in the desired high limit value.
(Use CLEAR/EXIT key to erase the value keyed in)
WEIGHT
UNIT WEIGHT
COUNT
--Hi--
3000.0
0
Ib kg g
Local Remote HI OK LO ADD
High limit High limit value keyed in Window for displaying low
limit value to be input
3. Press ALARM key again and key in the desired low limit value as
indicated below.
( low limit value effective only after high limit is preset )★
WEIGHT
UNIT WEIGHT
COUNT
--lo--
3000.0
1000.0
Ib kg g
Local Remote HI OK LO ADD
Low limit High limit value keyed in Low limit value keyed in
4. Press U.WT/SAVE key to complete weight check range preset
procedures and return to normal counting mode.
S.W
lack
U.W
lack
Battery
low
Stable Zero NET
S.W
lack
U.W
lack
Ba
ttery
low
Stable Zero NET
S.W
lack
U.W
lack
Battery
low
Stable Zero NET