JTS R-4 - Page 48

44
7.RF Power：
Use ▲ or ▼ to move to ''7. RF Power.''
Push SET to enter the setting page.
Push ▲: high→ high RF power
Push ▼: low→ low RF power
Push SET to save the change.
Note: The microphone drains more power out of
battery with high RF power.
8.Contrast：
(1)Use ▲ or ▼ to move to ''8. Contrast.'' Push SET
to enter the setting page.
(2)Adjust the contrast using ▲ or ▼. The larger
the value, the dark it is, and vice versa. The
contrast ranges from 0 to 20.
9.Light time
(1)Use ▲ or ▼ to move to ''9. Light time.'' Push SET
to enter the setting page.
(2)Adjust the time using ▲ or ▼.
Available for selection: off, 5~30 sec
(increment of 5 seconds), always on.
Device ID
Remoset
RF Power
Contrast
Light time
DigiCode
Contrast
Light time
DigiCode
Light time
LCD contrast
RF Power
High
Low
sec